How to Install a Ghost Immobiliser
A ghost immobiliser is an effective deterrent against car thieves. Combining this device with other security devices and remaining vigilant can help you create an effective defense against modern, tech savvy thieves.
A ghost immobiliser will protect your vehicle from hotwiring, key cloning and relay car theft by needing a pin code to start the engine. It works by using buttons that are already present on your center console or steering wheel, which means it's undetectable to criminals.
Identifying the Wires
With increasing instances of vehicles being stolen with no owner's key, it is important to protect your vehicle. Ghost immobilisers are a great way to add a layer of protection for your vehicle. It blocks all signals from your key fob so that it is impossible to start your vehicle without entering a pin.
While you can install a ghost immobiliser yourself, it is recommended to let a professional technician complete the job for you. A skilled professional will know the best location to put the unit in, and also how to properly connect it to the wiring of your vehicle. The process of installation is not easy and it is vital that the connections are done correctly to avoid damage or malfunctions.
To get the best results, it is recommended to work in a well-lit area and wear the appropriate safety gear. You should also read the user manual to become familiar with the wiring system. This will assist you in identifying the wires needed for the installation and make sure that you have the proper equipment and components to complete the job right.
Once the wiring has been connected, you can reconnect your battery and determine if the system is working correctly. It is also important to ensure that the battery terminals are secured to avoid electrical issues. It is also important to label the CAN L and CAN H wires with labels or tape to be capable of keeping track of them throughout the installation process.
If you want to allow another person to drive your vehicle temporarily for valet parking or when your vehicle is in for a service or repair, the Ghost Immobiliser can be put into Transport Mode. ghost 11 immobiliser can enter the code using a service button on the steering column, central console or door panels. The Ghost Immobiliser will go into PIN mode that allows for changing of the code.
Some thieves try to circumvent the ghost immobiliser using jamming or spoofing devices to stop or send fake signals to the system. This can be avoided by investing in anti-jamming technology and regularly monitoring your Ghost immobiliser to detect signs that it has been altered with.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security tool designed to stop car theft. It utilizes cutting-edge technology to monitor and disable the engine when the correct PIN code is entered, thus preventing the vehicle from being driven away by thieves. The system is extremely effective and stealthy, as it does not have visible indicators to discourage criminals. You may have to take away your device to perform maintenance, upgrades, or even when you sell your vehicle.
This procedure requires special tools and knowledge as you'll be working with wires and bypassing factory parts. Additionally, it is crucial to follow the step-by-step directions that are provided by the manufacturer of the ghost immobiliser. It is also a good idea to seek out a professional mechanic or auto electrician, particularly if you're not experienced in working on vehicles.
After identifying the wires and disconnecting them, it is important to examine the condition of your battery. Verify that the battery is clean, free of corrosion, and that all connections are secure. Consider replacing the battery if required to ensure that it is sturdy enough to meet the electrical requirements of a security system aftermarket.
After you have disconnected the wiring from the battery, you can start to take out the ghost immobiliser. Use strippers or wire cutters to safely disconnect the wires, making sure not to damage the wires or their terminals. Label each wire to make it easier to reconnect them in the future. If the wires have been soldered, use a tool that is heat-resistant to break the connection. To avoid short-circuits, it is crucial to wrap the wires in insulation tape or heat shrink tubing.
Connect the wires using the 12V constant power source. Use the fuse tap to safeguard the connections by using fuse. Connect the grounding wire with an adequate grounding on the vehicle's chassis.
Once you have reconnected the wires, restart your vehicle and enter the PIN code. Then, try starting the engine again. If the engine fails to start then you have successfully removed the ghost immobiliser.
Making Connections
A ghost immobiliser is an affordable way to improve the safety and security of your vehicle. It is connected to the CAN bus system of your car, intercepting signals, and stopping the vehicle from starting until the correct PIN code is entered. It is nearly impossible to disable. It's an excellent choice for those who need extra security and peace of mind. It can lower your insurance premiums when utilized in conjunction with a Thatcham Approved Tracking System.
It is vital to find and study the wiring diagram for your car model prior to start the installation. The diagram serves as a reference to identify the wires that are required to make precise connections. Using the proper connections or soldering techniques will ensure that the connection is long-lasting and secure.
ghost 11 immobiliser connecting the Ghost immobiliser with the CAN bus must be correctly identified and connected. Use small labels or tape to label the CAN L and CAN H wires. This will help prevent confusion during installation. The wires are placed in different locations on every vehicle. It is important to refer to the wiring diagram or online sources to be able to identify the wires.
Once the correct cables are connected After connecting the correct cables, power will be restored to the Ghost immobiliser. It is a good idea to test the immobiliser. Start the engine, but do not enter the code. This will ensure that the immobiliser is installed correctly and functioning as intended. It is recommended to test your immobiliser frequently, as this will aid in identifying any issues or problems early.
Another benefit of the ghost immobiliser is that it can be set up in a matter of minutes and does not require any cutting or modifications to the wiring inside your vehicle. It is also an excellent choice for those who wish to add extra security to their vehicles, as it can be utilized together with a Thatcham-approved alarm or tracker, which will send a notification to your smartphone or tablet when the vehicle is being altered.
Mounting the Unit
The Ghost immobiliser is a great an effective deterrent for car thieves especially when it is paired with the use of a GPS tracking device. The device makes use of buttons on the centre console, doors and steering wheel to create a unique sequence that you can only recognise. This stops your car from starting. The unit is also tamper proof and weatherproof. It also comes with a three-year guarantee and is recommended by a range of insurance companies.
It is important to carefully adhere to the steps during the installation process. While some people are able to handle the job themselves, it's best to seek out a professional you are unsure. Multimeters and wire strippers are essential tools to locate the wiring and create precise connections. You should also buy insulation and electrical tape to protect your connections from damage. After the installation is completed, it's a good idea test the device to make sure that it's working as intended.
Ghost immobilisers are a great way to secure your vehicle, especially in areas that have high rates of crime. It can be paired up with an iPhone application to make it easy to manage and monitoring. It stops key cloning or ECU swapping, among other security threats. It's a popular choice for those who own vehicles who want to safeguard their investment, and it's easy to install.
The Ghost II immobiliser is designed in a sleek, low-profile appearance that makes it unnoticeable by thieves. It connects to your vehicle's CAN (Controller Area Network) and blocks you from starting the engine without entering a PIN. The PIN code is generated using a unique sequence of buttons on the steering wheel, centre console or doors. It is able to be changed at any time. The device is also tamper-proof, and comes with an GPS tracking system to help the police locate your car in the event of theft. It's a great choice for protecting your car from theft and is Thatcham certified.